- Generates a license for the newest database available in the SW center at the time of activation
- Access to the newest vehicles specs directly from the OEM
- Suitable for all Windows-based wheel aligners from Beissbarth (Easy CCD, ML, KDS, VAS, Easy3D, and Touchless) and Bosch (FWA 4xxx, FWA 64xx, and FWA 9000)
Perfectly integrated into ADAS calibration and head light testing:
- The space in front of the lift can be used for ADAS calibration boards and head light tester
Best in class: Highest accuracy
- 360° measurement field for permanent self-check and adjustment of system to movement and vibrations
- No calibration to a specific lift allows a measurement on any wheel alignment bay
- Wireless data transfer and integrated battery enable full mobility and allow the use of Windows tablets or laptops
- Intelligent and space-saving charging solution that can be mounted on any wall
- Quality made in Germany
Sophisticated software for maximum measurement and adjustment efficiency
- Real-time display of measured values combined with vehicle specs
- Visually animated adjustment instructions for third-party vehicles
- Several languages as standard for staff from all over the world
- Toe indicator in full-lock state as well as track- and camber display in raised state for comfortable toe rod adjustment
- ASA network ready
- Live readings without having to lift or move the vehicle
- Data transmission: 2.4 Ghz
- Sensor head with encoder and battery power (2.4 Ghz frequency)
- Software with quick check for direct reception
- Vehicle specs database with additional BMW Professional data
- Cabinet (without PC, printer, and monitor)
- BMW quick clamps with distance pins
- Precision spoiler adapter 50 mm
- Precision turntables with electronics (for maximum steer) for front axle
- Precision turntables without electronics for rear axle
- Remote control
- Brake pedal depressor and steering wheel holder
- Emergency cable set for sensor heads
The KDS II only allows the use of BMW quick clamps. The use of other wheel clamp solutions in combination with the KDS II is not approved by the BMW Group.
| Operating temperature | 5 - 40 °C |
|---|---|
| Electrical connection | 120 - 220 V | 50 - 60 Hz |
| Data transmission type | - Cordless |
| Measuring system | - CCD |
| Power | 0,5 kW |
| Frequency | 2400 MHz |
| Storage temperature | -20 - 60 °C |
| Relative humidity, use | (40 °C) 10 - 90 % |
| Height cabinet | 1520 mm |
| Width cabinet | 880 mm |
| Depth cabinet | 770 mm |
| Weight cabinet | 110 kg |
| Operating temperature | 5 - 40 °C |
|---|---|
| Electrical connection | 120 - 220 V | 50 - 60 Hz |
| Data transmission type | - Cordless |
| Measuring system | - CCD |
| Power | 0,5 kW |
| Frequency | 2400 MHz |
| Storage temperature | -20 - 60 °C |
| Relative humidity, use | (40 °C) 10 - 90 % |
|---|---|
| Height cabinet | 1520 mm |
| Width cabinet | 880 mm |
| Depth cabinet | 770 mm |
| Weight cabinet | 110 kg |
- Vehicle database update Cars & Vans Europe | Key Card1 690 002 0151 690 002 015
- Mechanical aluminum turntable Precision1 690 401 0281 690 401 028
- Very high quality and lifetime in workshop environment
- Steel balls for minimal friction and maximum precision
- Electronic aluminum turntable without connecting cable | Precision1 690 401 0131 690 401 013
- Enables full steering lock on CCD and Touchless aligner
- Very high quality and lifetime in workshop environment
- Precision turntable without connecting cable
- Steel balls for minimal friction and maximum precision
- Connecting cable for electronic turntables1 690 403 0011 690 403 001
- Connecting cable between electronic turntables and sensor head
- Enables full steering lock on CCD and Touchless aligner
- Protective rubber cover for aluminum turntable1 690 402 0011 690 402 001
- Additional protection from dirt and liquids
- Drive-on ramps for two aluminum turntables1 690 701 0521 690 701 052
- Drive-on ramps for turntables including connecting piece and drive off protection
- Enables rolling compensation on lifts without embedded turntables
- Drive-on ramps for turntables and sliding plates1 690 401 0081 690 401 008
- Set of Drive-on ramps for turntables and sliding plates
- Suitable for lifts without cutouts for turntables or sliding plates, e.g. MOT lifts
- Quick clamp BMW | OEM1 690 801 0011 690 801 001
- Distance pins sit directly on the wheel hub, a runout compensation is therefore not necessary
- Quick and secure mounting on the vehicles
- For ultimate precision
- Homologated for BMW
- Only suited for CCD and Q.Lign systems
- Für Raddurchmesser bis 850mm
- For original BMW rims with 4x100mm and 5x120mm pin hole pattern
- Distance bolts for quick clamp BMW | 120 mm1 690 801 0031 690 801 003
- For one quick clamp
- Spoiler adapter 50 mm | Precision1 690 401 0141 690 401 014
Spoiler adapter for CCD wheel aligners | with spirit level
- Wallboard for sensor heads1 690 311 1461 690 311 146
- Space saving solution for charging sensor heads on the wall
- Frees up space in the workshop and safely stores sensor heads when not in use
- Cable set 1 690 401 0121 690 401 012
- Emergency cable for power and data transmission of the sensor heads
- Brake pedal depressor 1 690 401 0061 690 401 006
- Steering wheel holder 1 690 401 0071 690 401 007
