- Generates a license for the newest database available in the SW center at the time of activation
- Access to the newest vehicles specs directly from the OEM
- Suitable for all Windows-based wheel aligners from Beissbarth (Easy CCD, ML, KDS, VAS, Easy3D, and Touchless) and Bosch (FWA 4xxx, FWA 64xx, and FWA 9000)
| Display | 11,6" Touchscreen |
|---|---|
| Operating temperature | 5 - 40 °C |
| Electrical connection | 230 V / 50 - 60 Hz |
| Sensor count | 8 |
| Data transmission type | 433MHz |
| Measuring system | CCD |
| Storage temperature | -20 - 60 °C |
| Run-out compensation | Ja |
| Clamping range of wheel clamps | 13 - 22 " |
| Country of Origin, customs | DE |
| Relative humidity, use | (40 °C) 10 - 90 % |
| Workshop-Net | Standard |
| Load capacity per turntable | 1500 kg |
| Display | 11,6" Touchscreen |
|---|---|
| Operating temperature | 5 - 40 °C |
| Electrical connection | 230 V / 50 - 60 Hz |
| Sensor count | 8 |
| Data transmission type | 433MHz |
| Measuring system | CCD |
| Storage temperature | -20 - 60 °C |
| Run-out compensation | Ja |
|---|---|
| Clamping range of wheel clamps | 13 - 22 " |
| Country of Origin, customs | DE |
| Relative humidity, use | (40 °C) 10 - 90 % |
| Workshop-Net | Standard |
| Load capacity per turntable | 1500 kg |
- Vehicle database update Cars & Vans Europe | Key Card1 690 002 0151 690 002 015
- Sliding plate for rear axle | short1 690 401 0031 690 401 003
- +/- 10° rotating range
- Sliding plate for rear axle | long1 690 401 0041 690 401 004
- +/-2.5° rotating range
- Drive-on ramps for two aluminum turntables1 690 701 0521 690 701 052
- Drive-on ramps for turntables including connecting piece and drive off protection
- Enables rolling compensation on lifts without embedded turntables
- Drive-on ramps for turntables and sliding plates1 690 401 0081 690 401 008
- Set of Drive-on ramps for turntables and sliding plates
- Suitable for lifts without cutouts for turntables or sliding plates, e.g. MOT lifts
- Extension set for Multi-fit clamps | 23 - 28"1 690 311 1131 690 311 113
- Set softline claws for 1 x Multi-fit clamp | Softline rims1 690 311 1641 690 311 164
- Set truck claws for 1 x Multi-fit clamp | Truck1 690 311 1151 690 311 115
For convex wheels mounted to a double-bearing hub and dually wheels.
Length: 10cm
- Central clamp Porsche Carrera GT1 690 301 0021 690 301 002
- Quick and secure mounting on the vehicle
- Reduces clamping errors
- Official VW special tool: VAG 6828
- Central clamp Porsche 911 GT3 and Turbo1 690 380 0021 690 380 002
- Special tool for Porsche 911 Turbo since 2009 and Porsche 911 GT3 since 2010
- Quick and secure mounting on the vehicle
- Reduces clamping errors
- Official VW special tool: VAS 6830
- Self-centering quick clamp for Porsche1 690 380 0101 690 380 010
- Attaches to the center hole of the rim
- Quick and secure mounting on the vehicle
- Reduces clamping errors
- Official VW special tool: VAS 6918
- Not suited for Porsche vehicles with center wheel bolt!
- Self-centering quick clamp for Tesla1 690 380 1611 690 380 161
- Attaches to the center hole of the rim
- Quick and secure mounting on the vehicle
- Reduces clamping errors
- Self-centering quick clamp for Ferrari1 690 381 2991 690 381 299
- Attaches to the center hole of the rim
- Quick and secure mounting on the vehicle
- Reduces clamping errors
- Used for wheel alignment and radar calibration - Wheel alignment requires 2 sets (4 clamps in total) - Radar calibration requires 1 set (2 clamps in total)
- Quick clamp Mercedes-Benz | OEM1 690 801 0021 690 801 002
- Distance pins sit directly on the wheel hub, a runout compensation is therefore not necessary
- Quick and secure mounting on the vehicles
- For ultimate precision
- Only suited for CCD and Q.Lign systems
- For wheel diameters up to 850mm
- For original Mercedes-Benz rims with pin hole pattern 5x125mm and 5x160mm
- Quick clamp BMW | OEM1 690 801 0011 690 801 001
- Distance pins sit directly on the wheel hub, a runout compensation is therefore not necessary
- Quick and secure mounting on the vehicles
- For ultimate precision
- Homologated for BMW
- Only suited for CCD and Q.Lign systems
- Für Raddurchmesser bis 850mm
- For original BMW rims with 4x100mm and 5x120mm pin hole pattern
- Distance bolts for quick clamp Mercedes Benz | 100 mm1 690 801 0071 690 801 007
- For one quick clamp
- Distance bolts for quick clamp BMW | 120 mm1 690 801 0031 690 801 003
- For one quick clamp
- Distance bolts for quick clamp Mercedes Benz and BMW | 125 mm1 690 401 0191 690 401 019
- For one quick clamp
- Precision spoiler adapter Porsche1 690 301 0041 690 301 004
- Possible adjustment from 85 - 165 mm
- For use in combination with VAG 1813, VAG 1995 and VAS 6141
- Spoiler adapter 50 mm1 690 401 0051 690 401 005
- Spoiler adapter 100 mm1 690 121 0011 690 121 001
- Wallboard for sensor heads1 690 311 1461 690 311 146
- Space saving solution for charging sensor heads on the wall
- Frees up space in the workshop and safely stores sensor heads when not in use
- Cable set 1 690 401 0121 690 401 012
- Emergency cable for power and data transmission of the sensor heads
- Toe press bar for Mercedes Benz1 693 600 0011 693 600 001
- Ballast bag 5 kg1 693 740 0011 693 740 001
Used for vehicles that require loading to a specific ride height in order to perform alignment
- Ballast bag 20 kg1 693 740 0031 693 740 003
Used for vehicles that require loading to a specific ride height in order to perform alignment
